Custom Automatic Gates from Dorvik Port Macquarie
Dorvik Port Macquarie are the North Coasts specialists in custom gate installations
We have been manufacturing and automating domestic and commercial gates all around NSW for over 30 years. We have developed and selected automation systems that are tried and tested, reliable and cost effective.
We design and fabricate all our own gates so the options for design are endless. Let your imagination run wild and let Dorvik Port Macquarie help you design, manufacture and install a system that suits your property and application.
Dorvik Port Macquarie have an automatic gate system to suit every driveway including cantilevered sliding gates, ground track sliding gates, bi-parting sliding gates and swing gates. We will match the best gate and automation system to suit your application, site and budget.
Ground Track Sliding Gates
About: The ground track sliding gate consists of a bolt down 'U' shaped track fitted to a concrete driveway or strip footing. The gate has matching 'U' shaped bottom rollers and a top support system.
Uses: The ground track sliding gate is best suited to front fences that have a concrete driveway or flat area to slide gate on.
Size: Ground track sliding gates can be made to suit any design width and can be single leaf or bi-parting.
Style: Ground track sliding gates can be made with many different infill styles to achieve the desired look.
Finish: Ground track sliding gates can be either powdercoated or hot dipped galvanised.
Automation: The ground track sliding gate can be automated via a vairiety of different motors including 24V - 240V, low, medium and high cycle and also low or high speed.
Swinging Gates
About: Swing gates are normally used when there is not sufficient room to slide a gate.They consist of heavy duty ball bearing hinges fitted to a steel post and the swing to 90 or 120 degrees.
Uses: Swing gates can be either single or double leaf and are ideal for swining over flat driveways. We also have a system to swing gates up a hill or slope if required.
Size: Swing gates can be made up to 5 metres wide single leaf or 10 metres wide double leaf. Gates over 3 metres may need an electric lock system.
Style: Swing gates can be made with various infill styles to achieve the desired look however wind resistance on the surface of the gate needs to be taken into consideration.
Finish: Swing gates can be either powdercoated or hot dipped galvanised.
Automation: The ground track sliding gate can be automated via hydraulic or harmonic arm motors in either 24V - 240V, low, medium and high cycle and also low or high speed.
Cantilevered Sliding Gate
About: Our cantilevered sliding gate system is generally utilised over gravel driveways when a ground track cannot be fitted. It can be installed with minimal site disturbance.
Uses: Our cantilevered gate is ideal for sites that are difficult to install a ground track. The gate can slide out and over a bank or across a sloping dirt driveway
Size: Our cantilevered sliding gate suits a single driveway up to 6 metres wide.
Style: Our cantilevered sliding gate can be made with various infill styles to achieve the desired look.
Finish: Cantilevered sliding gates can be either powdercoated or hot dipped galvanised.
Automation: Our cantilevered sliding gate can be automated via a variety of different motors including 24V - 240V, low, medium and high cycle and also low or medium cycle.
Custom gate example gallery
Enquire about a custom gate
